Copyright: Thursday, June 06, 2002 11:15:28


Pressing this button will stop the save as process.  The current journal will remain unchanged.


Check this field if you want the “Second Copy – Void” or SCV image to be added on the left side of all additional copies.  Use of this feature allows the original and all additional copies to be easily distinguished.


Choose this option if the all additional copies are to be appended to the journal.  Note that when this option is selected, the additional copies will NOT be printed, but will instead be saved into the current journal file for later printing or archiving.


Controls within this group determine the driver’s and printer’s action when processing all additional copies.  Controls within this group are enabled when the Simple Copy field is unchecked.  If you want all additional copies to be printed in a different manner then the original, or if you want all additional copies saved to the current journal file, be sure to uncheck the Simple Copy field and configure all controls within this group appropriately.


Controls within this group determine how all additional copies are cut when printed..


The options contained within this field represent all the saved journal files associated with this printer.  The “Save As” and “Print” buttons below are actions that are applied to the journal file selected within this field.  Note that the “All” option means that the “Print” button will cause all journal files to be printed.


The options contained within this field represent all the saved journal files associated with this printer.  The “Save As” and “Print” buttons below are actions that are applied to the journal file selected within this field.  Note that the “All” option means that the “Print” button will cause all journal files to be printed.


Check this field if you want logos to be printed on all additional copies.  If this field is checked, any logos printed on the original copy will also be printed on the additional copies.  Typically, logos do not contain transaction pertinent data, and are not required on the additional copies.  Not checking this field will cause the additional copies to be printed without logos, saving paper and disk space.


Controls within this group determine how all additional copies are outputted.


The options associated with this field control how the printer cuts all additional copies.  The options associated with this field contain cut action pairs that the printer will execute at page end and document end positions.


The options associated with this field control how the printer cuts all additional copies.  The options associated with this field contain cut action pairs that the printer will execute at page end and document end positions.


Enter the number of HALF seconds the printed should wait for all additional copies to be removed before being retracted.  Valid entries for this field are between 1 and 255 inclusive.


Cycle to the number of HALF seconds the printed should wait for all additional copies to be removed before being retracted.  Valid entries for this field are between 1 and 255 inclusive.


Choose this option if the printer is not to retract all additional copies.  If this option is chosen, the printer will wait for each additional copy to be removed before printing the next.


Choose this option if the printer should retract all additional copies if they are not removed from the printer within the time period specified.


Enter the number of HALF seconds the printed should wait for all additional copies to be removed before being retracted.  Valid entries for this field are between 1 and 255 inclusive.


Units for this field are in ½ seconds.  For example, if 40 is entered into this field, the printer will wait 20 (40 * ½) seconds before retracting the paper.


Controls within this group determine how the printer’s presenter functions when printing all additional copies.


Choose this option if all additional copies are to be printed immediately after printing the original copy.  If this option is chosen, the additional copies will NOT be saved into the journal file.


Choose this option if all additional copies are to be printed immediately after printing the original copy and then saved into the journal file.


Press this button to print the journal file currently selected.  If “<Current>” is chosen, then the current journal file will be printed,  If “<All>” is chosen, then all journal files associated with this printer will be printed.


Controls within this group allow for the printing and renaming (“Save As”) of all journal files associated with this printer.


The options associated with this field determine at which quality (read speed) all additional copies will be printed at.


The options associated with this field determine at which quality (read speed) all additional copies will be printed at.


Press this button to save the current journal file under a specified name.  After this operation is completed, the current journal file will be emptied and the new journal file name will appear as a selectable (and printable) option in the journal file list.


Check this field if all additional copies are to be printed exactly as the original copy is.  If this field is checked, all additional copies will be printed immediately after the original.


Check this field to disable the ETB function.  If this field is unchecked, the ETB code will not be sent to the printer, and the printer’s internal counters will not be incremented following the printing of each job.


Check this field to enable the ETB function.  If this field is checked, the ETB code will be sent to the printer, and the printer’s internal counters will be incremented following the printing of each job.


Enter the name of the file into which the current journal should be saved.  Note that no path or file extension should be entered,


Options associated with this field determine which logos are printed at the document bottom position.


Options associated with this field determine which logos are printed at the document bottom position.


Options associated with this field determine which logos are printed at the document top position.


Options associated with this field determine which logos are printed at the document top position.


Choose the “SRL” option within this field to enable printing of the previously generated logos.  Choose “BMP” to enable printing of any BMP logo files that have been placed into the logo directories associated with this printer.


Choose the “SRL” option within this field to enable printing of the previously generated logos.  Choose “BMP” to enable printing of any BMP logo files that have been placed into the logo directories associated with this printer.


Press this button to print all logos associated with the selected timing point as chosen in the “Generate To” field.


Choose the timing point for which the next print job’s pages should be associated with, as logos.


Choose the timing point for which the next print job’s pages should be associated with, as logos.


Controls within this group determine how the logos associated with this printer are created and managed.


Choose this field to enable the generation of logos associated with this printer.


Choose this field to enable the printing of logos associated with this printer.


Controls within this group determine how the driver processes incoming documents with respect to the generation or printing of logos.


Controls within this group determine how logos are printed during the processing of incoming documents.


Options associated with this field determine which logos are printed at the page bottom position.


Options associated with this field determine which logos are printed at the page bottom position.


Options associated with this field determine which logos are printed at the page top position.


Options associated with this field determine which logos are printed at the page top position.


Press this button to complete the “Save As” operation.


Controls within this group determine which of the connected cash drawers will be opened while printing each job.


Controls in this group determine how the original copy of all print jobs is cut during printing.


Choose the timing point at which the printer should open cash drawer number 1.  If cash drawer number 1 should not be opened, choose the “No Use” option.


Enter the number of milliseconds that the printer should pulse cash drawer number 1 for in order to open it.  The units associated with this field are 10 milliseconds.  For example, if you want cash drawer number 1 to be pulsed for 200 milliseconds then enter 20 (20 * 10 milliseconds = 200 milliseconds).  Valid entries for this field are between 1 and 127 inclusive.


Cycle to the number of milliseconds that the printer should pulse cash drawer number 1 for in order to open it.  The units associated with this field are 10 milliseconds.  For example, if you want cash drawer number 1 to be pulsed for 200 milliseconds then enter 20 (20 * 10 milliseconds = 200 milliseconds).  Valid entries for this field are between 1 and 127 inclusive.


Enter the number of milliseconds that the printer should pulse cash drawer number 1 for in order to open it.  The units associated with this field are 10 milliseconds.  For example, if you want cash drawer number 1 to be pulsed for 200 milliseconds then enter 20 (20 * 10 milliseconds = 200 milliseconds).  Valid entries for this field are between 1 and 127 inclusive.


Units for this field are in 10 milliseconds.  For example, if 20 is entered into this field, the printer will pulse cash drawer number 1 for 200 (20 * 10 milliseconds) seconds.


Controls in this row and the next determine how and when the printer will open cash drawer number 1.


Choose the timing point at which the printer should open cash drawer number 1.  If cash drawer number 1 should not be opened, choose the “No Use” option.


Choose the timing point at which the printer should open cash drawer number 2.  If cash drawer number 2 should not be opened, choose the “No Use” option.


Controls in this row and the next determine how and when the printer will open cash drawer number 2.


Choose the timing point at which the printer should open cash drawer number 2.  If cash drawer number 2 should not be opened, choose the “No Use” option.


The options associated with this field control how the printer cuts the original copy.  The options associated with this field contain cut action pairs that the printer will execute at page end and document end positions.


The options associated with this field control how the printer cuts the original copy.  The options associated with this field contain cut action pairs that the printer will execute at page end and document end positions.


The options associated with this field control how the printer processes each page of the document, and correspond to the type of paper installed into the printer.


The options associated with this field control how the printer processes each page of the document, and correspond to the type of paper installed into the printer.


Enter the number of HALF seconds the printed should wait for the original copy to be removed before being retracted.  Valid entries for this field are between 1 and 255 inclusive.


Cycle to the number of HALF seconds the printed should wait for the original to be removed before being retracted.  Valid entries for this field are between 1 and 255 inclusive.


Choose this option if the printer is not to retract the original copy.  If this option is chosen, the printer will wait for the original copy to be removed before printing again.


Choose this option if the printer should retract the original copy if it is not removed from the printer within the time period specified.


Enter the number of HALF seconds the printed should wait for the original to be removed before being retracted.  Valid entries for this field are between 1 and 255 inclusive.


Units for this field are in ½ seconds.  For example, if 40 is entered into this field, the printer will wait 20 (40 * ½) seconds before retracting the paper.


Controls within this group determine how the printer’s presenter functions when printing the original copy.


The options associated with this field determine at which quality (read speed) the original copy will be printed at.


The options associated with this field determine at which quality (read speed) the original copy will be printed at.


Choose the option corresponding to the portion or the onscreen document that you want to be printed.  If you want the entire onscreen document printed (without scaling), choose the “All” option.


Choose the option corresponding to the portion or the onscreen document that you want to be printed.  If you want the entire onscreen document printed (without scaling), choose the “All” option.


Choose the percentage of the original document that should NOT be printed.  The remaining portion of the document will be scaled to the entire printable width and then printed.


Choose the percentage of the original document that should NOT be printed.  The remaining portion of the document will be scaled to the entire printable width and then printed.


Raster print Options – Property Sheet Page Usage

This property sheet page is used to control the printer during printing of the original or first copy.  This page contains a table of choices for each option available on this property sheet page.  Because the feature set of each printer differs slightly, not all options and choices described here will be available for all printers.

The Default column of each table indicates the default choice as set immediately following the installation of a given model’s driver.  If the ‘¤’ character appears in this column that indicates that this choice is the default for all models.  If a model number(s) is listed in this column that indicates that this choice is the default for that (those) model(s).

Printer Quality - List Box Option

Choice	Default	Description
Standard	¤	fastest printing speed used at a compromise to print quality
High		trade off between print speed and print quality
Best		best print quality via the slowest printing
Paper Type - List Box Option

Choice	Default	Description
Receipt	¤	variable length pages ending after the last printed line
Ticket		constant length pages as setup in the application
Black Mark		page length determined by the printers sensing of the paper’s black markings
Cut Action - End Page / End Doc - List Box Option

Choice	Default	Description
Form Feed / Form Feed		document printed
Form Feed / Tear Bar	613	last page fed to the tear bar position
Form Feed / Partial Cut	643,700, 800,942	last page fed to the cutter and partially cut
Form Feed / Full Cut		last page fed to the cutter and fully cut
Form Feed / Full Cut Top Search		first page is reversed to top before printing & last page fed to cutter and fully cut
Partial Cut No Feed / Partial Cut No Feed		all pages partially cut immediately without being fed
Partial Cut / Partial Cut		all pages fed to the cutter and partially cut
Partial Cut No Feed / Full Cut No Feed		pages 1 ~ n-1 are partially cut without feeding and page n is fully cut without feeding
Partial Cut / Full Cut		pages 1 ~ n-1 are fed to the cutter and partially cut and page n is feed to the cutter and fully cut
Full Cut No Feed / Full Cut No Feed		all pages fully cut immediately without being fed
Full Cut / Full Cut	992	all pages fed to the cutter and fully cut
Full Cut Top Search / Full Cut Top Search		all pages are reversed to the top before printing and fed to the cutter and fully cut after printing
Cash Drawer – Drawer 1 – Action / Timing - List Box Option

Choice	Default	Description
No Use	¤	not opened during printing
Document Top		opened before printing
Document Bottom		opened after printing
Page Top		opened before printing each page (opened many times)
Cash Drawer – Drawer 1 – Pulse Width – Edit Box / Spin Button Option

Choice	Default	Description
1 <= n <= 127	20	the pulse duration sent by the printer to the cash drawer on open (units in 10msec)
Cash Drawer – Drawer 2 – Action / Timing - List Box Option

Choice	Default	Description
No Use	¤	not opened during printing
Document Top		opened before printing
Document Bottom		opened after printing
Page Top		opened before printing each page (opened many times)
Presenter Control – Paper Retract - Group Box Option

Choice	Default	Description
Enabled		printer will retract the paper if not taken within the specified time period
Disabled	¤	printer will not retract the paper – the paper must be removed before next print
Presenter Control – Paper Retract Timeout – Edit Box / Spin Button Option

Choice	Default	Description
1 <= n <= 255	30	the amount of time the printer waits for paper removal before retracting it (units in ½ sec)


Logo – Property Sheet Page Usage

This property sheet page is used to configure the driver for the printing and generation of logos.  The steps required to generate and print logos are described in the Creating and printing logos section.  This page contains a table of choices for each option available on this property sheet page.  The option / choice combinations described here are referenced in the later section to give you a full understanding of the usage of the logo feature.

Mode - Group Box Option

Choice	Default	Description
Generate		the pages of the next printed job will be converted and stored as logo data files
Print	¤	logos will be inserted into the printing process as configured by the options within the Print group box
Generate – Generate To - List Box Option

Choice	Default	Description
Document Top	¤	generated logo data files will be associated with the document top timing point by storing them in the printer’s document top logo data directory
Page Top		generated logo data files will be associated with the page top timing point by storing them in the printer’s page top logo data directory
Page Bottom		generated logo data files will be associated with the page bottom timing point by storing them in the printer’s page bottom logo data directory
Document Bottom		generated logo data files will be associated with the document bottom timing point by storing them in the printer’s document bottom logo data directory
Print – Document Top - List Box Option

Choice	Default	Description
No Print	¤	no logos will be printed at the document top timing point
Sequential		one logo will be sequentially (incremented across print jobs) printed at the document top timing point
All		all logos will be printed at the document top timing point
Print – Page Top - List Box Option

Choice	Default	Description
No Print	¤	no logos will be printed at the page top timing point
Sequential		one logo will be sequentially (incremented across pages) printed at the page top timing point
All		all logos will be printed at the page top timing point
Print – Page Bottom - List Box Option

Choice	Default	Description
No Print	¤	no logos will be printed at the page bottom timing point
Sequential		one logo will be sequentially (incremented across pages) printed at the page bottom timing point
All		all logos will be printed at the page bottom timing point
Print – Document Bottom - List Box Option

Choice	Default	Description
No Print	¤	no logos will be printed at the document bottom timing point
Sequential		one logo will be sequentially (incremented across print jobs) printed at the document bottom timing point
All		all logos will be printed at the document bottom timing point
Print – File Type - List Box Option

Choice	Default	Description
SRL	¤	the driver will look for and use SRL logo data files
BMP		the driver will look for and use BMP logo data files


Copy – Property Sheet Page Usage

This property sheet page is used to control the printer during printing of all additional copies.  Additional copies are defined as being any copy 2 through n.  Additional copies are printed by specifying the copy count in the printer’s properties area or in the print dialog box of an application.  The steps required to print or journal an additional copy are described in the Printing and journaling an addition copy section.  This page contains a table of choices for each option available on this property sheet page.  The option / choice combinations described here are referenced in the later section to give you a full understanding of the usage of the copy feature.

Simple Copy - Check Box Option

Choice	Default	Description
Checked	¤	additional copies are printed exactly as the original (journaling not possible)
Unchecked		other options on this property sheet page set how additional copies are printed
Additional Copies – Add SCV Image - Check Box Option

Choice	Default	Description
Checked	¤	the SCV image is added down the left hand side of all additional copies
Unchecked		the SCV image is not added
Additional Copies - Print Logo - Check Box Option

Choice	Default	Description
Checked		any logos printed on the original copy are also printed on the additional copies
Unchecked	¤	any logos printed on the original copy are removed when printing the additional copies
Additional Copies - Printer Quality - List Box Option

Choice	Default	Description
Standard	¤	Fastest printing speed used at a compromise to print quality
High		Trade off between print speed and print quality
Best		Best print quality via the slowest printing
Cut Action - End Page / End Doc - List Box Option

Choice	Default	Description
Form Feed / Form Feed		document printed
Form Feed / Tear Bar	613	last page fed to the tear bar position
Form Feed / Partial Cut	643,700, 800,942	last page fed to the cutter and partially cut
Form Feed / Full Cut		last page fed to the cutter and fully cut
Form Feed / Full Cut Top Search		first page is reversed to top before printing & last page fed to cutter and fully cut
Partial Cut No Feed / Partial Cut No Feed		all pages partially cut immediately without being fed
Partial Cut / Partial Cut		all pages fed to the cutter and partially cut
Partial Cut No Feed / Full Cut No Feed		pages 1 ~ n-1 are partially cut without feeding and page n is fully cut without feeding
Partial Cut / Full Cut		pages 1 ~ n-1 are fed to the cutter and partially cut and page n is feed to the cutter and fully cut
Full Cut No Feed / Full Cut No Feed		all pages fully cut immediately without being fed
Full Cut / Full Cut	992	all pages fed to the cutter and fully cut
Full Cut Top Search / Full Cut Top Search		all pages are reversed to the top before printing and fed to the cutter and fully cut after printing
Output Method - Group Box Option

Choice	Default	Description
Print After Original	¤	all additional copies are printing immediately after the original
Append to Journal		all additional copies are not printed and appended to the current journal file
Print & Append		one additional copy is printed and the remaining are appended to the current journal file

The remaining controls on this page are not used to configure the printing or journaling of additional copies.  They are rather, used to print and manage previously constructed journal files.  Usage of the controls described below will causes immediate action, such as the immediate printing of a previously constructed journal file.

Print Journal – Select Journal - List Box Option

Choice	Default	Description
<Current>		the journal file currently being constructed by append operations
<All>		all journal files associated with this printer
dynamic		the names of all journal files created by saving the <Current> journal file under a new file name via the Save As button
Print Journal - Print – Button

Choice	Default	Description
Pushed		the journal file chosen in the Select Journal option is outputted for printing to the printer
Print Journal – Save As – Button

Choice	Default	Description
Pushed		the Save As dialog box appears prompting the user for a new file name under which the current journal file should be saved


Zoom – Property Sheet Page Usage

This property sheet is used to control which portion of the document is printed.  By limiting the printing to only a portion of a document you can make that portion larger.  The steps required to correctly select a portion of a document are described in the Using the zoom feature to print a page subsection section.  This page contains a table of choices for each option available on this property sheet page.  The option / choice combinations described here are referenced in the later section to give you a full understanding of the usage of the zoom feature.

Note that the Zoom property sheet page is only available on zoom models.  The zoom models included in this driver set are:

•	TUP992 Zoom Raster Printer

•	TUP942 Zoom Raster Printer

•	TSP847 Zoom Raster Printer

Focus Area - List Box Option

Choice	Default	Description
All	¤	the entire document is printed
Right		the specified Zoom Factor percentage of the document is removed from the left and the remaining right portion of the document is scaled to printable width and printed
Center		the specified Zoom Factor percentage divided by 2 is removed from both the left and right and the remaining center portion of the document is scaled to printable width and printed
Left		the specified Zoom Factor percentage of the document is removed from the right and the remaining left portion of the document is scaled to printable width and printed
Zoom Factor - List Box Option

Choice	Default	Description
+00%	¤	the entire document is printed
+05%		05% of the document is removed and 95% printed across the printable width
+10%		10% of the document is removed and 90% printed across the printable width
+15%		15% of the document is removed and 85% printed across the printable width
+20%		20% of the document is removed and 80% printed across the printable width
+25%		25% of the document is removed and 75% printed across the printable width
+30%		30% of the document is removed and 70% printed across the printable width
+35%		35% of the document is removed and 65% printed across the printable width
+40%		40% of the document is removed and 60% printed across the printable width
+45%		45% of the document is removed and 55% printed across the printable width
+50%		50% of the document is removed and 50% printed across the printable width
+55%		55% of the document is removed and 45% printed across the printable width
+60%		60% of the document is removed and 40% printed across the printable width
+65%		65% of the document is removed and 35% printed across the printable width
+70%		70% of the document is removed and 30% printed across the printable width
+75%		75% of the document is removed and 25% printed across the printable width
+80%		80% of the document is removed and 20% printed across the printable width
+85%		85% of the document is removed and 15% printed across the printable width
+90%		90% of the document is removed and 10% printed across the printable width
+95%		95% of the document is removed and 05% printed across the printable width


ETB – Property Sheet Page Usage

This property sheet page is used to control the printer’s maintenance counters.  By enabling the ETB function you can have the printer track the number of successful and unsuccessful print jobs.  These statistics can help you to manage a smooth integration by spotting units that have commonly occurring problems, possible caused by misuse, faulty mounting, or otherwise.  This page contains a table of choices for each option available on this property sheet page.

Send ETB Command - Group Box Option

Choice	Default	Description
Disable	¤	the ETB maintenance counter increment command is not sent
Enable		the ETB maintenance counter increment command is sent


Help Text


Help Text


Help Text


Help Text


Help Text


Help Text


Help Text


Help Text


Help Text


Help Text


Help Text


Help Text


Help Text


Help Text


Help Text


Help Text


Help Text


Help Text