Specifies the printer options that apply to CITIZEN SYSTEMS printers


Specifies whether the cutter is enabled and when to be applied.The value is in a format of “Page/Job”.For example the value “No Cut/Full Cut”indicates that the printer must not cut the paper when page ends and must fully cut the paper when the entire document (job)is printed.The particular printer may not support the paper cutting or may support it in two different modes –Partial cut,Full cut or both –Partialand Full cut.If it supports only one of these cutting modes then the options for the other one will not be visible.


Specifies the options for cash drawer #1.


Specifies the options for cash drawer #2.


Specifies when to open the cash drawer.The supported options include:

Never–Means to never open this cash drawer

Job Start –Open this cash drawer just before printing the first page of the document

Job End –Open this cash drawer just after the last page of the document is printed

Page End –Open the cash drawer after printing fo every page of the document


Specifies the “Open command”pulse width (in milliseconds)that will be sent to this cash drawer for opening.The valid values are between 50and 250milliseconds.


Specifies the options for the buzzer.


Specifies how many times the buzzer will beep just before printing the first page of the document.The valid values are between 0 and 9.


Specifies how many times the buzzer will beep just after printing of the last page.The valid values are between 0 and 9.


Specifies the options applied to barcode printing.


Specifies the Text position of the HRI  (Human Readable Interpretation)data when printing barcodes.The selections can be:

None–The printer will not print HRI

Top–The printer will print HRI on the upper side of each barcode

Bottom–The printer will print HRI on the bottom side of each barcode

Top and Bottom–The printer will print HRI on the top and bottom of each barcode


Specifies the options that apply to Logo printing.The Logo is a simple image stored in the printer’s NV memory (Non-volatile memory)and can be easily printed without the need to be downloaded again and again from the PC to the printer.The driver supports printing of up to five previous downloaded logos.


Specifies which logo to be printed on the top of the first page of the document.The value may be one of the following:

None–Do not print a logo there

Logo1 –Print Logo1

Logo2 –Print Logo2

Logo3 –Print Logo3

Logo4 –Print Logo4

Logo5 –Print Logo5


Specifies which logo to be printed on the bottom of the first page of the document.The value may be one of the following:

None–Do not print a logo there

Logo1 –Print Logo1

Logo2 –Print Logo2

Logo3 –Print Logo3

Logo4 –Print Logo4

Logo5 –Print Logo5


Specifies which logo to be printed on the top of every middle page of the document.The value may be one of the following:

None–Do not print a logo there

Logo1 –Print Logo1

Logo2 –Print Logo2

Logo3 –Print Logo3

Logo4 –Print Logo4

Logo5 –Print Logo5


Specifies which logo to be printed on the bottom of every middle page of the document.The value may be one of the following:

None–Do not print a logo there

Logo1 –Print Logo1

Logo2 –Print Logo2

Logo3 –Print Logo3

Logo4 –Print Logo4

Logo5 –Print Logo5


Specifies which logo to be printed on the top of the last page of the document.The value may be one of the following:

None–Do not print a logo there

Logo1 –Print Logo1

Logo2 –Print Logo2

Logo3 –Print Logo3

Logo4 –Print Logo4

Logo5 –Print Logo5


Specifies which logo to be printed on the bottom of the last page of the document.The value may be one of the following:

None–Do not print a logo there

Logo1 –Print Logo1

Logo2 –Print Logo2

Logo3 –Print Logo3

Logo4 –Print Logo4

Logo5 –Print Logo5